PROF. DR. H. BÜLENT ERTAN

 

A.     GENERAL

LAST NAME, NAME

ERTAN, H. Bülent

CORRESPONCE ADDRESS

ODTÜ Electrical - Electronics Eng. Dept. 06531  ANKARA

TEL:  90 (312) 210 23 59

FAKS: 90 (312) 210 12 61

E-MAIL  ertan@metu. edu.tr

 

B.     EDUCATION

PERIOD

DEGREE

UNIVERSİTY

AREA

1973 – 1977

PhD

The University of Leeds

Electrical &  Electronics Eng.

1971 – 1973

MSc

Middle East Tech. Univ.

Electrical &  Electronics Eng.

1966 – 1971

BSc

Middle East Tech. Univ.

Electrical &  Electronics Eng

1963 – 1966

 

19 Mayıs High School Samsun

 

 

C.     ACADEMIC EXPERIENCE

WORK PERIOD

DEGREE

DEPARTMENT

UNIVERSITY

1988 – 2001

Professor

Electrical &  Electronics Eng.

METU

1983 – 1988

Assos. Prof.

Electrical &  Electronics Eng.

METU

1979 – 1983

Asst. Prof.

Electrical &  Electronics Eng.

METU

1978

Lecturer

Electrical &  Electronics Eng.

METU

 

D.    MANAGERIAL EXPERIENCE

WORK PERIOD

MANAGERIAL WORK

ORGANIZATION

2000 – Present

Member of Board of Trustees

Prof. Dr. Parlar Education and Research Foundation

1996 – Present

Project Group Coordinator

Bilten (TÜBİTAK) Research Institute

1995 – 2001

Group Coordinator

Bilten (TÜBİTAK) Research Institute

1999 – 2000

Chairman of Board of Trustees

Prof. Dr. Parlar Education and Research Foundation

1995 – 1996

Asst. Director

Bilten (TÜBİTAK) Research Institute

1988 – 1989

Asst Dean

Faculty of Engineering METU

1985 – 1988

Asst. Head of Dept.

Electrical and Electronics Eng. Dept. Middle East Technical University

 

E.     CONSULTANCY EXPERIENCE (Selected)

PERIOD

SUBJECT

COMPANY

1999-2002

High Frequency Power Supply

KOMSA A.Ş.

1998-1999

Design of a new Motor Series

ALARKO  A.Ş.

1992 - 1998

Motor Technology Development

TEE  A.Ş.

1995 - 1998

Electrical Drive for Electric Loco.

ASELSAN A.Ş.

1978 - 1992

Motor – Generator Design

ELSAN A. Ş.

1986 - 1988

Early Warning Systems

Civil Defence Directorate

 

F.      AREAS OF INTEREST

Specialization

Key Words

 

Electrical Machines

Induction motors, Switched Reluctance motors

Design, Drive

Power Electronics

High Frequency Power Supplies

 

Electrical Drives

Field Oriented Drives

 

 

 

G.    MEMBERSHIPS

PERIOD

TYPE OF MEMBERSHIP

INSTITUTION

1975 - present

member

Institution of Electrical Eng. (UK)

1972 - present

member

Elektrik Müh. Odası (Türkiye)

1993 - 1998

member

Rüzgar Enerjisi Birliği (Türkiye)

 

H.    AWARDS

AWARD

GIVEN BY

YEAR

Overseas Premium

IEE  UK

1995

Akın Çakmakçı Reward for most succesful Industry –University Cooperation

Turkish Technology Development Foundation TTGV

2002

 

I.       PUBLICATIONS 1977-2002

 

1)      H. Bülent Ertan, Hayrettin Can, Erhan Akin; “A New Integration Algorithm for Flux Estimation Using the Voltage Model” COMPEL, Vol. 21, No., 2, 2002

 

2)      H. Bülent Ertan, Bülent Dağ, Gerard Capolino; "An Accurate Model for the Calculation of Some Parameters of Single-Phase Permanent Magnet Motors"; International Conference on Electrical Machines; 25-28 August 2002; Brugge - Belgium; Proceedings

 

3)      H. Bülent Ertan, Barış Çolak; "A Study on Improvement of Conducted EMI from A Quasi-Resonant Inverter"; International Conference on Electromagnetic Compatibility; 24-26 July 2002 Bangkok - Thailand.

 

4)      H. Bülent Ertan, Bülent Dağ, Gerard Capolino; "Calculation of Some Parameters of Single Phase PM Motor for Design Optimization"; International Conference on Optimization of Electrical and Electronic Equipments; 16-17 May 2002; Braşov, Romania, p.p. 351-356.

 

5)      H. Bülent Ertan, Cemil Yamalı; "Doğrudan şebekeye bağlı güneş pilli ve kombine güneş pilli güneş - elektrik dönüştürücü sistemlerin değerlendirilmesi"; Temiz Enerji Günleri; 1-3 Mayıs 2002 Muğla

 

6)      Ertan, H.B., Bizkevelci, E., Avenoğlu, B., “An Induction Motor Design Tool Combining Analytical and Field Solution  Techniques” ICEMS 2001, 18-20 August 2001, Proceedings CD, Electrical Drives

 

7)      Ertan, H.B., Bizkevelci, E., Avenoğlu, B., “An Induction Motor Design Tool Combining Analytical and Field Solution Techniques”, ISEF 2001, 20-22 September 2001, Cracow-Poland, pp.153-158

 

8)      Ertan, H.B., Daşdemir, B., “An Approach to Analysis and Design of Switched Reluctance Motors” ISEF 2001, 20-22 September 2001, Cracow-Poland, pp.19-34

 

9)      Ertan, H.B., Bizkevelci, E., Avenoğlu, B., “A Design Tool Utilizing Numerical Field Solution and Analytical Design and Optimization Techniques” AEGEAN Conference Electrical Machines and Power Electronics, ACEMP2001, 27-29 June 2001, Kuşadası-Turkey, pp.628-633

 

10)  Ertan, H. B., Leblebicioglu, K., Ozmener, M., Demirel, O., Bulatov, O., “Fuzzy Logic Control Scheme for Mains Synchronized Solar-Electrical Energy Conversion” Power Conversion Intelligent Motion Power Quality, PCIM 2000, 6-8 June 2000, Nurnber-Germany, pp.30-40

 

11)  Ertan, H. B., Camlıkaya, T., Demirel, O., “Software for Simulation and Controller Development for High Frequency High Voltage Power Supplies” The Third International Power Electronics and Motion Control Conference, IPEMC 2000, 15-18 Aug. 2000, Beijing-China, pp. 665-670

 

12)  Ertan, H.B., Leblebicioğlu, K., Demirel, O., “An Approach to Design and Optimization of HV High Frequency Resonant Power Transformers” International Conference on Electrical Machine, ICEM 2000, 28-30 August 2000, Espoo-Finland, pp. 183-187

 

13)  Şahin, F., Ertan H.B., Leblebicioğlu, K. “ Optimum Geometry for Torque Ripple Minimization of Switched Reluctance Motors”, IEEE Transactions on Energy Conversion, Vol. 15, No. 1, March 2000, pp. 30-40Can, H., Akin, E., Ertan, H.B.,

 

14)  Ertan, H. B., Şimşir, N. Balkan., “Comparison of PWM and PFM Induction Drives Regarding Audible Noise and Vibration for Household Applications”, The 1999 IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives, IEEE SDEMPED’99, September 1-3, 1999, Gijon-Spain, pp. 33-40

 

15)  Ertan, H. B., Şimşir, B., “A Comparison of Torque Capabilities of Axial Flux and Radial Flux Type of Brushless DC (BLDC) Drives for Wide Speed Range Applications”, IEEE1999 International Conference on Power Electronics and Drive Systems, PEDS’99, July 1999, Hong Kong, pp. 719-724.

 

16)  Ertan, H. B., “Prediction of Torque and Inductance Displacement Characteristics of Asymmetrically Slotted Variable-Reluctance Motors Using a Simplified Model for Numerical Field Solution”, IEEE Transactions on Magnetics Vol. 35 No. 5 September 1999, pp. 4247-4258.

 

17)  Çadırcı, I., Ermiş, M., Nalçacı, E., Ertan, H.B., Rahman, M., “A Solid State Direct On line Starter for Medium Voltage Induction Motors with Minimized Current and Torque Pulsations”, IEEE Transactions on Energy Conversion, Vol. 14, No. 3, September 1999, pp. 402-412

 

18)  Ertan, H. B, Şimşir, B., “A Pulse Frequency Modulated Drive For a Wide Speed Range Application”, PEDES’98 1998 International Conference on Power Electronics Drives and Energy Systems for Industrial Growth, 1-3 December 1998, Perth, Western Australia, pp.546-551.

 

19)  Ertan, H.B., Leblebicioğlu, K., Pirgaip, M., “High Frequency Loss Calculation In A Smooth Rotor Induction Motor Using FEM”, International Conference on Electrical Machines, ICEM’98, Sept. 2-4 1998, İstanbul, Vol. 3/3. pp. 1838-1848.

 

20)  Akın, E., Can, H., Ertan, H.B., Üçtuğ, Y., “Comparison of Integration Algorithms for Vector Control”, International Conference on Electrical Machines, ICEM’98, Sept. 2-4 1998, İstanbul, Vol. 3/3. pp. 1626-1631.

 

21)  Hamarat, S., Leblebicioğlu, K., Ertan, H.B., “Comparison of Deterministic and Non-deterministic Optimization Algorithms for Design Optimization of Electrical Machines”, International Conference on Electrical Machines, ICEM’98, Sept. 2-4 1998, İstanbul, Vol. 3/3. pp. 1477-1482.

 

22)  Leblebicioğlu, K., Ertan, H.B., Çekiç, A., “Prediction of Induction Motor Parameters From Numerical Field Solutions”, International Conference on Electrical Machines, ICEM’98, Sept. 2-4 1998, İstanbul, Vol. 2/3. pp. 740-745

 

23)  Ertan, H. B, Leblebicioğlu, K., Şimşir, B., Hamarat, S., Çekiç, A., Pirgaip M., “Design Optimization of Variable Frequency Driven Three Phase Inductions Motors”, Compel, The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 17 No.1/2/3. 1998, MCB University Press, 0332-1649. pp. 135-140

 

24)  Ertan, H. B, Leblebicioğlu, K., Şimşir, B., Hamarat, S., Çekiç, A., Pirgaip M., “Design Opitmization Of Variable Frequency Driven Three Phase Inductions Motors”, International Symposium on Electromagnetic Fields in Electrical Engineering, Sep. 25-27 1997, Poland, pp.301-304.

 

25)  Ertan, H. B., Leblebicioğlu, K., Hamarat S., “Design of Double Speed and Variable Frequency Driven Induction Motors, Electromotion, Vol. 4, No.1, January 1997, pp.38-43.

 

26)  F. Şahin, H. Bülent Ertan, K. Leblebicioğlu, “Optimum Geometry For Torque Ripple Minimization Of Switched Reluctance Motors”, International Conf. on Electrical Machines, 10-12 Eylül 1996, Vol 2, Vigo-Spain, pp 110-115, bildiri English.

 

27)  I. Eskenderzadeh, H. Bülent Ertan, M. Yıldırım Üçtuğ, “A neurofuzzy Control Strategy for the converter circuit of an x ray tube”, PCIM Conference, 21-23 May 1996, Nurnberg  Almanya, Power Conversion Volume, pp 523-536, bildiri English.

 

28)  F. Şahin, H. B. Ertan, K. Leblebicioğlu, “Optimum Geometry For Torque Ripple Minimization Of Switched Reluctance Motors”, ISEF’95 International Symposuimon Electromagnetic Field in Electrical Engineering, 25-27 September 1995, Greece, pp 2443-246.

 

29)  H. Karabudak, K. Leblebicioğlu, H. B. Ertan, “Application Of Fuzzy Control To Induction Heating Problem”, International Aegean Conference on Electrical Machines and Power Electronics, 5-7 June 1995, Kuşadası-Turkey, Vol.2/2, pp 650-655.

 

30)  N. B. Şimşir, H. B. Ertan, “The Implementation of A 3-Phase Frequency Modulated Inverter Using a Single microcontroller”, International Aegean Conference on Electrical Machines and Power Electronics, 5-7 June 1995, Kuşadası-Turkey, Vol.1 /2, pp 100-106.

 

31)  Erhan Akın., Bülent Ertan., Yıldırım Üçtug. "A Method For Stator Resistance Measurement Suitable For Vector Control" "Proc IECON'95"  5-9 Eylül 1994 bologna Italy. S. 2122-2126 Bildiri  English.

 

32)  Erbil Nalçacı., Ertan H. B. "A Field Orientation Scheme For Voltage Fed Induction Motor by Phase Angle Control With State Feedback" "Proc International Conference on Electrical Machines'94" Bildiri  English.

 

33)  Erbil Nalçacı., Ertan H.B. " A field Orientation scheme for voltage Induction Motor With Closed Loop Phase Angle Control" "Proc Mediterranean Electrotechnical Conference'94"  12-14 Nisan 1994 Antalya-Türkiye, Cilt 2, S 801-805 Bildiri English.

 

34)  Ertan H.B.,  NATO ASI "Modern Electrical Drives"  "Proceedings of Papers Presented at poster Sessions", Şubat 1994, Kitap English.

 

35)  Ertan H. B., Aftahi, M. SPCAD a tool for computer aided design of single phase induction motors, IMACS TC 1-93 Proc. Computational Aspects of Electromechanical Energy converters 7-9 Jully 1993, Montreal Canada 311-316.

 

36)  Safavi, A. Ertan H. B. " A microprocessor controlled switched Reluctance Motor Drive" Proc. Iranian Conference on Electrical Engineering May 18-21 1993 Tehran Iran. 225-234.

 

37)  Aftahi, M. Ertan H. B. "A tool for performance Analysis of Single Phase Capacitor Induction Motors with computer", Proc. Iranian Conference on Electrical Engineering May 18-21 1993 Tehran Iran 699-708.

 

38)  Ermiş, M., Ertan,H. B., '' Various Induction Generator Schemes for Wind-Electricity Generation'', Electric Power systems Research,23, 1992, 71-83.

 

39)  Ermiş, M.,  Ertan, H.B.,  Akpınar, E., Ülgüt, F., '' Autonomous Wind Energy Conversion System With a Simple Controller For Maximum Power Transfer'', IEE Proc., Part B, Vol 139,No 5 Sep.1992 pp 421-428. IEE overseas premium award.

 

40)  Akın E, Ertan H. B. , Üçtug Y., '' Vector Control of Induction motor through rotor flux orientation with stator flux components as reference'', International conference on Electrical Machines, Manchester UK Sept. 1992, pp 853-857.

 

41)  H. Bülent Ertan (Prof. Dr.), Muammer Ermiş (Doç. Dr.), Sadeddin Alshelleh, "Optimum Induction Generator Characteristics and Size  for Grid Connected Wecs", European Wind Energy Conference, Amsterdam, Ekim 1991, Bildiriler 613- 617 (English).

 

42)  Akın Erhan (Araş. Gör.), H. Bülent Ertan (Prof. Dr.), M. Yıldırım Üçtug (Doç. Dr.), "An Indirect Method for Field Oriented Control of Induction Motor", Third  International Workshop on Microcomputer Control of Electric Drives, Mediterranean Institute of Technology, Marsilya, Fransa, 1-2 Temmuz 1991, Bildiriler, M-1-11. (English) işlem.

 

43)  Ertan, H.B., (Prof. Dr.), Yagan, Ö. ., Diriker, A., "Optimum Parameters for Doubly-Salient Motors Driven by A Voltage Source, International Conference on Electrical Machines Boston, ABD, Eylül 1990, Proceedings 806-811.

 

44)  Kukrer,O. T.  Ertan, H.B. (Prof. Dr.), " A Method for Voltage-Frequency Control of Inverters: Pulse Position Modulation, Internationals Conference Electrical Machines, Boston ABD, Eylül 1990, Proceedings 574-579.

 

45)  Kükrer O.T (Dr.), Richardson J. (Dr.), Ertan H.B. (Doç.Dr.); "A microcomputer based circuit for the generation of single phase optimized P.W.M. waveforms, ibid, 373-377. (English).

 

46)  Ertan H.B. (Doç.Dr.),  Tohumcu M. (Dr.); "A method for optimum design of switched reluctance motors", ibid, 551-555. (English)

 

47)  Kükrer O.T. (Dr.),  Ertan H.B. (Doç.Dr.), "An integral equation approach to the computation of nonlinear fields in electrical machines, IEEE Trans. on Magnetics. 24, No 4, July (1988) 1118-1124. (English)

 

48)  Tohumcu M.(Dr.), Ertan H.B. (Doç.Dr.); "Prediction of performance of swithched reluctance motor for design purposes", International Conference on Electrical Machines,     September 1988, Pisa, Italy, Proc. Vol 2, 557-561. (English).

 

49)  Kükrer O.T. (Dr.), Richardson J.(Dr.), Ertan H.B. (Doç.Dr.);             "Closed loop control of a P.W.M. induction motor Drive system", Universities Power Engineering Conference 88, Trent Polytechnic, Nottingham, U.K. 20-22 September 1988 Proc.  (İngilizce).

 

50)  Ermiş, M. (Doç.Dr.), Ertan  H.B. (Doç.Dr.), Akpınar, E., Ülgüt, F., "Design and Implementation of a Small Autonomous Wind Energy Conversion System", Proc. Fifth International Conference on Energy Options , Reading U.K. 7-9 April 1987, Proc.111-114. (English).

 

51)  Ermiş, M.  (Doç.Dr.), Ertan  H.B. (Doç.Dr.), Demirekler, M. (Y.Doç.Dr.), Sarıbatur, B. (Dr.), Üçtug, Y. (Dr.),  Sezer, E. (Doç.Dr.), "The Use of Induction Generators in Wind Energy Conversion Systems", Proc. 13th World Energy Conference,  Cannes, France,  1-22, October 1986, Proc.1- 23, (English).

 

52)  Ertan  H.B.  (Doç.Dr.), "Analytical Prediction of Torque and Permeance- Displacement Characteristics of Asymmetrical Tooth Pairs," Proc. International Conference on Electrical Machines, Munih, Almanya, 8-9-10 Eylül 1986. Proc. 97-100. (English).

 

53)  Ertan, H.B. (Doç.Dr.), "Analytical Prediction of Torque and Inductance Characteristics of Identically Slotted Doubly- Salient Reluctance Motors", IEE Proc. Pt B, 133, No.4, (1986),  230- 236. (English)

 

54)  Ertan H.B. (Doç.Dr.), "Prediction of torque and inductance- displacement  curves of   single stack VR stepping motors using numerical  field solutions",   International Conference on Electrical Machines,  18-21 September 1984,  Laussanne, Switzerland Proc. Part 1, 126-129,. (English).

 

55)  Tahsin O.,  Ertan H.B. (Doç.Dr.), "An Integral Equation Formulation for  Electrical Machine Field Analysis", Proc. International Conference on Electrical Machines, September 1984, Laussanne, Switzerland. Proc. Part 1, 165-168. (English).

 

56)  Ertan B. (Y.Doç.Dr.), Sarıbatur B., "An efficient method for  design optimizatin of synchronous generators",    International Conference on Electrical Machines,  Budapest, Hungary, September 1982. Proceedings PART 2  412 - 415, . (English).

 

57)  Ertan B. (Y.Doç.Dr.), Sarıbatur B., "A method for optimum design for synchronous generators on small computer systems", IFAC Workshop on Computer Aided Design of Projects and Development Policies, Ankara,  June 1982, proceedings  343- 364. (English).

 

58)  Ertan H.B., "Introduction to an accurate analytical method for predicting the static  torque curve of saturated VR multiple stack stepping motors", 10th Annual Symposium on Incremental Motion Control Systems and Devices,  University of Illinois,  June 1981, proceedings  41-46. (English).

 

59)  Ertan B. (Y.Doç.Dr.), Aykanat C., "A new approach to optimized design of induction motors", International Conference on Electrical Machines,  Athens, September 1980, proceedings 1784-1794. (English).

 

60)  Ertan H.B.(Y.Doç.Dr.), Hughes A. (Dr.), Lawrenson P.J.(Prof. Dr.),  "Efficient numerical method for predicting the torque- displacement curve of saturated VR stepping motors", IEE Proc. Vol. 127, Pt.B,  No.4, (1980), 246-252. (English)

 

61)  Ertan H.B.(Y.Doç.Dr.),Hughes A. (Dr.), Lawrenson P.J.(Prof. Dr.), Harris M.R. (Dr.),   "A new approach to the prediction of  static  torque curve of saturated VR stepping motors", 8th Annual Symposium on Incremental Motion Control Systems and Devices, May 1979, proceedings 169-179. (English).

 

62)  Harris M.R. (Dr.), Andjargholi V., Lawrenson P.J. (Prof. Dr.), Hughes A. (Dr.), Ertan B., "Unifying approach to the static torque of stepping motor structures", Proc. IEE, 124, No. 12, (1977), 1215-1224. (English)

 

63)  Harris M.R.(Dr.), Andjargholi V., Lawrenson P.J. (Prof. Dr.), Hughes A. (Dr.), Ertan B., "Static torque in PM and VR  stepping motors a comparative review", IEE Conference on Small Electrical Machines, IEE publication No.136, March 1976, proceedings 100-107. (English).

 

64)  Harris M.R.(Dr.), Andjargholi V., Lawrenson P.J. (Prof Dr.), Hughes A. (Dr.), Ertan B., "Limitations  on reluctance torque in doubly-salient structures, Proceedings of the International Conference on  Stepping Motors and Systems", the University of Leeds   July 1974, proceedings 158-169. (English).

 

65)  Harris M.R. (Dr.), Andjargholi V., Lawrenson P.J. (Prof Dr.), Hughes A. (Dr), Ertan B., "Limitations  on specific torque in stepping motors", 3rd Annual Symposium on Incremental Motion     Control Systems and Devices, University of Illinois.  May 1974, proceedings paper P. (English).

 

J. PUBLICATIONS 1977-2002 (Turkish)

 

1.      Ertan B. (Y.Doç.Dr.), Aykanat C., "Optimum asenkron motor tasarımı için bir method", TUBİTAK VII. Bilim Kongresi, Ekim 1980. Bildiriler

 

2.      Ertan B. (Y.Doç.Dr.), Bilgin K., "Çok katlı degişken relüktans motorlarında moment-konum karakteristiginin hesabı", TUBİTAK VII. Bilim Kongresi, Ekim 1980. Bildiriler

 

3.      Ertan H.B. (Y.Doç.Dr.), Sarıbatur B., Akpınar E.,  "Optimum senkron alternatör tasarımı için hızlı yakınsayan bir yöntem", 1983 yılında Türkiye'de Elektrik ve Elektronik Endüstrisi Sempozyumu,  İstanbul, Eylül 1983, Bildiriler MAG- E 81 1-14.

 

4.      Tahsin O., Ertan H. B. (Doç. Dr.), "Numerical solutıon of electric machine fields using magnetization integral equation", 2 nd International  Symposium  on Antennas, Propagation, Microwaves and  Electromagnetic Theory, ODTÜ, Ankara, November 1983, Proc. 341-360. (İngilizce)

 

5.      Ertan H.B. (Doç.Dr.), "Makina tasarımında üç fazlı asenkron motorların seçimi", 1. Ulusal Makina Tasar›m ve İmalat Kongresi ODTÜ, Ankara, 19-21 Eylül 1984, Bildiriler  23-35.

 

6.      Dalgıç A., Ertan H.B. (Doç.Dr.), Güran C.H. (Doç. Dr.), "Bir takım tezgahının Mikrobilgisayarla Kontroluyla ilgili bir çalışma",  5. Ulusal Bilişim Kurultayı 8-10 Ekim 1984, İstanbul, Turkey. Bildiriler.

 

7.      Dalgıç A., Ertan H.B. (Doç.Dr.), Güran C.H. (Doç.Dr.), "Bir takım tezgahının Mikrobilgisayarla Kontrolu üzerine   bir çalışma", 3. Ulusal Otomatik Kontrol Sempozyumu, İstanbul, 28-30 Kasım 1984,  Turkey.

 

8.      Tohumcu M. (Dr.), Ertan  H.B. (Doç.Dr.), "Çift taraflı çıkık kutuplu magnetik yapılarda momenti denetleyen parametreler ve optimum boyutlar", 1. Ulusal Elektrik Mühendisligi Sempozyumu,  Adana, Eylül 1985. Bildiriler 595-602.

 

9.      Ertan  H.B. (Doç.Dr.), "Asimetrik Çift taraflı çıkık kutuplu magnetik yapılarda kuvvet ve endüktansın Analitik olarak hesaplanması için bir yöntem" ibid  587-594.

           

10.  Ertan H.B. (Doç.Dr.), Ermiş M. (Doç.Dr.), Akpınar E., "Rüzgardan Elektrik Enerjisi üreten bağımsız bir güç kaynagı için optimum alternatör tasarımı", ibid,  364-371.

 

11.  Ertan H.B. (Doç.Dr.), Ermiş M. (Doç.Dr.), Ertaş A. (Doç.Dr.), Özay N. (Doç.Dr.), "Ark ocagı içeren elektrik sistemlerinde kompanzasyon I: ocakların kompanzasyon gereksiminin belirlenmesi ve kompansatör tasarımı", ibid, 308-315.

 

12.  Ertan H.B. (Doç.Dr.), Ermiş M. (Doç.Dr.), Ertaş A. (Doç.Dr.), Özay N. (Doç. Dr.), "Ark ocağı içeren elektrik sistemlerinde kompanzasyon II: Rezonansa neden olan  harmoniklerin  ölçümü ve kompanzasyon filtrelerinin  tasarımı", ibid,  316-324.

 

13.  Ergül F.R.  (Doç.Dr.), Ertan H.B.  (Doç.Dr.), "Takım tezgahlarında mikroişlemci ve adım motoru uygulamaları", Teknoloji 2. Milli Kongresi  Ankara 6-7 May›s 1986. Bildiriler 89-104.

 

14.  Ertan H.B.  (Doç.Dr.), "Çagdaş degişken hızlı tahrik sistemleri", 2. Ulasal Makina Tasarım ve İmalat Kongresi,  17-19 Eylül 1986, Bildiriler 327-337.

 

15.  Tohumcu M. (Dr.), Ertan H.B. (Doç.Dr.), "Anahtarlı relüktans motorlu tahrik sistemlerinin yapıları ve temel özellikleri", 2. Ulusal Elektrik Mühendisligi Ulusal Kongresi, Ankara, 23- 25 Eylül 1987, Bildiriler, 735-738.   

 

16.  Ertan H.B. (Doç.Dr.), Tohumcu M. (Dr.), "Anahtarlı relüktans motorlarının hız egrilerinin denetimi", 2. Ulusal Elektrik Mühendisligi Ulusal Kongresi,  Ankara, 23-25 Eylül 1987, Bildiriler, 739-742.

 

17.  Tohumcu M. (Dr.), Ertan H.B. (Doç.Dr.), "Anahtarlı relüktans motorlarının performansının tasarım amacıyla hesaplanması",  2. Ulusal Elektrik Mühendisligi Ulusal Kongresi,  Ankara, 23- 25 Eylül 1987. Bildiriler, 743-746 

 

18.  Kükrer O.T. (Dr.), Ertan H.B. (Doç.Dr.), "Evirgeç frekans gerilim denetiminde bir yöntem: Darbe yerleştirme modülasyonu", ibid, 700-730.

 

19.  Ertan, H.B. (Doç.Dr.), Tandogan, V. Sinan "Senkron Alternatörlerde Sıcaklık Yükselmesinin Hesabı: Model Geliştirilmesi ve Uygulama ODTÜ Elektrik ve Elektronik Mühendisligi Bölümü 30. Yıl Sempozyumu,   ODTÜ Ankara, 8-10 Şubat 1989, Bildiriler 189-195 

 

20.  Ertan, H.B. (Doç.Dr.), Tandogan, V. Sinan "Senkron Alternatörlerde Sıcaklık Yükselmesinin Hesabı: Yöntem Seçimi ve Tanıtılması ODTÜ Elektrik ve Elektronik Mühendisligi Bölümü 30. Yıl Sempozyumu, ODTÜ Ankara, 8-10 œubat 1989, Bildiriler 196-203 

 

21.  Ertan, H.B. (Prof.Dr.), Demirtürk, Yüksel, "Simulasyon Yazılımı Aracılıgıyla Endüksiyonla Eritme Amaçlı Evirgeç Tasarımı Elektrik Mühendisligi 3. Ulusal Kongresi   İTÜ İstanbul, 25-30 Eylül 1989 Bildiriler 3/1 186-189.

 

22.  Ertan, H.B. (Prof.Dr.), "Endüksiyonla Eritme Amaçlı Ocak ve Uyumlu Güç Kaynagı Tasarımı", Güç Elektronigi Semineri, KTÜ Trabzon, 16-22 Ekim 1989,

 

23.  Ertan, H.B. (Doç.Dr.), TandoŸan, V. Sinan "Senkron Alternatörlerde  Sıcaklık Yükselmesinin Hesabı: Model Geliştirilmesi ve Uygulama ODTÜ Elektrik ve Elektronik Mühendisligi Bölümü 30. Yıl Sempozyumu,   ODTÜ Ankara, 8-10 Şubat 1989, Bildiriler 189-195 

 

24.  Ertan, H.B. (Doç.Dr.), Tandogan, V. Sinan "Senkron Alternatörlerde Sıcaklık Yükselmesinin Hesabı: Yöntem Seçimi ve Tanıtılması ODTÜ Elektrik ve Elektronik Mühendisligi Bölümü 30. Yıl Sempozyumu, ODTÜ Ankara, 8-10 Şubat 1989, Bildiriler 196-203 

 

25.  Ertan, H.B. (Prof.Dr.), Demirtürk, Yüksel, "Simulasyon Yazılımı Aracılıgıyla Endüksiyonla Eritme Amaçlı Evirgeç Tasarımı Elektrik Mühendisligi 3. Ulusal Kongresi   İTÜ İstanbul, 25-30 Eylül 1989 Bildiriler 3/1 186-189.

 

26.  Ertan, H.B. (Prof.Dr.), "Endüksiyonla Eritme Amaçlı Ocak ve Uyumlu Güç Kaynagı Tasarımı", Güç Elektronigi Semineri, KTÜ Trabzon, 16-22 Ekim 1989,

 

27.  Akın Erhan (Araş. Gör.), H. Bülent Ertan (Prof. Dr.), M. Yıldırım Üçtug (Doç. Dr.), "Asenkron Motorların Denetiminde Akım ve Gerilim Ölçümüyle Alan Yönlendirme için Bir Yöntem", Bilkon'91, Bilkent Üniversitesi, Ankara, Temmuz 1991, Bildiriler.

 

28.  Akın Erhan (Araş. Gör.), H. Bülent Ertan (Prof. Dr.), M. Yıldırım Üçtug (Doç. Dr.), "Akım ve Gerilim Ölçümüyle Asenkron Motorda Alan Yönlendirme: Model ve Pratik Sorunlar", Elektrik Mühendisligi 4. Ulusal Kongresi, 9 Eylül Üniversitesi, İzmir, Eylül 1991, Bildiriler, 5.

 

29.  Ertan H.Bülent, Aftahi Mehdi. " Tek Fazlı Kapasitörlü Motorların Bilgisayar İle Analiz ve Tasarımı" Elektrik Mühendisligi 5. Ulusal Kongresi, Karadeniz Teknik Üniversitesi  13-18 Eylül 1993. Bildiriler Kitabı.

 

30.  F. Şahin, H. B. Ertan, K. Leblebicioğlu, “Anahtarlı Relüktans Motorların Moment Dalgacıklarını Enazlama Amaçlı Tasarım Eniyilemesi”, Elektrik Mühendisliği 6. Ulusal Kongresi, 11-17 Eylül 1995, Bursa, Cilt 1, s.393-396.

 

31.  E. Akın, B. Ertan, Y. Üçtuğ, “Hız Duyarsız Vektör Kontrol Algoritmalarında Gerilim Modelinin Uygulama Sorunları”, Elektrik Mühendisliği 6. Ulusal Kongresi, 11-17 Eylül 1995, Bursa, Cilt 1, s.450-453.

 

32.  Şimşir, N. B., Ertan, H. B., “3 Fazlı Darbe Sıklık Modulasyonlu bir eviricinin tek bir mikro denetleyici kullanılarak uygulanması”, Elektrik -Elektronik Bilgisayar Mühendisliği 7. Ulusal Kongresi, 8-14 Eylül 1997, Ankara, yp.430-433.

 

33.  Ertan, H. B., Leblebicioğlu, K., Hamarat, S., “Çift Hızlı ve Değişken Frekansla Sürülen Asenkron Motorların Tasarım Optimizasyonu”, Eletrik-Elektronik Bilgisayar Mühendisliği 7. Ulusal Kongresi, 8-14 Eylül 1997, Ankara, Syf. 434-437

 

34.  Can., H., Akın, E., Ertan, H.B., “Sayısal İşaret İşlemci Kullanılarak Gerçekleştirilen Vektör Kontrolun Performans Değerlendirmesi”, Eletrik-Elektronik Bilgisayar Mühendisliği 8. Ulusal Kongresi, 1999, Gaziantep, Syf. 146-149

 

 

K.                  BOOKS

Ertan, Üçtuğ, Consoli, Colyer "Modern Electrical Drives" NATO ASI series Kluwer Publishing Holland 2000.

 

L.                Ph.D. THESIS SUPERVISED

5

 

M.                 MS THESIS SUPERVISED

30

 

N.              APPLIED RESEARCH PROJECTS

Over 20